AMSOIL Synthetic 10W-30/SAE 30 Diesel Oil (ACD)
See Pricing Information or Place an
Package sizes include:
1-Gallon Bottles (case of 4)
AMSOIL Synthetic 10W-30/SAE 30 Diesel Oil (ACD) is formulated with premium synthetic base oils that exceed both
10W-30 multi-grade and SAE 30 straight-grade viscosity requirements for outstanding performance in modern and older
diesel engines. Unlike conventional SAE 30 motor oils, AMSOIL ACD has a naturally high viscosity index and does not
contain paraffin (wax). It has a -36°F pour point and qualifies for SAE 10W, making it an “all season” multi-grade
lubricant with a wide operating temperature range. AMSOIL ACD is formulated without viscosity index improvers (VI).
This shear stable formulation stops viscosity loss and associated bearing and cylinder bore wear. AMSOIL ACD
contains premium additives with a high 12 TBN to neutralize acids from blow-by, exhaust gas recirculation (EGR) and
high sulfur diesel fuels. It protects against damaging piston deposits, ring sticking and sludge.
AMSOIL, the leader in automotive synthetic lubrication, produced the world’s first API
qualified synthetic motor oil back in 1972. Trust the extensive experience of AMSOIL The First in
Synthetics® to do the best job protecting your equipment.
Where these viscosity grades are specified, AMSOIL Synthetic 10W-30/SAE 30 Diesel Oil (ACD) provides outstanding
performance as a straight-grade SAE 30 for older two- and four-stroke diesels and as a multi-grade SAE 10W-30 in
modern four-stroke diesels as well as gasoline engines. AMSOIL ACD is ideal for use in a wide variety of light and
heavy-duty applications, including agriculture, off-road construction, trucking, mining, industrial (pumps and
generators) and personal automotive or commercial transportation. It is recommended for use with low or high sulfur
diesel fuels in standard, turbocharged or supercharged engines, all off-road engines and pre-2007 on-road
• SAE 10W-30 performance without VI improvers
• Cost-effective replacement for conventional oils
• Excellent shear stability
• Outstanding wear protection
• Superior protection over a broad range of operating temperatures
• Extended service life with oil analysis
AMSOIL ACD is recommended
for diesel engines and other applications requiring any of the listed worldwide specifications and gasoline
engines requiring API SL, SJ, SH... or ACEA A3.
• API CI-4+/CH-4/SL, CF, CF-2
• Global DHD-1
• ACEA A3/B3, E3, E5
• JASO DH-1 • Mack EO-M+, EO-N Premium Plus ’03
• Detroit Diesel Power Guard 93K214
• Caterpillar ECF-1a, ECF-2
• Cummins CES 20076/20077/20078
• Volvo VDS-3/VDS-2
• Mercedes Benz 228.1/228.3/229.1
• MAN 271/3275
• MTU Type 2
AMSOIL ACD is compatible with conventional and synthetic motor oils, however, mixing AMSOIL ACD with other oils
will shorten the oil life expectancy and reduce the performance benefits. AMSOIL does not support extended drain
intervals where AMSOIL ACD has been mixed with another product.
Aftermarket additives are not recommended for use with AMSOIL ACD.
AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil (ACD) is recommended for extended drain
intervals in engines that are unmodified and in good operating condition.
Diesel Engine Service
- Three times (3X) OEM* recommendation, not to exceed 50,000 miles/600 hours or one year, whichever comes
first. Drain intervals may be extended further with oil analysis.
Gasoline Engine Service
- Two times (2X) OEM* recommendation, not to exceed 15,000 miles or one year, whichever comes first.
*Operating conditions and drain intervals for severe and normal service are defined by the OEM. Refer to your
Note: Extended drain intervals are not recommended when using biofuels containing >10%
ethanol or 5% biodiesel (B5). Follow OEM drain intervals or extend drain intervals with oil analysis.
AMSOIL Ea™ and Donaldson Endurance™ full flow oil filters are designed for extended drain
intervals. They stop smaller particles, have less restriction and last longer than regular filters. For best
performance, use AMSOIL Ea or Donaldson Endurance oil filters.
AMSOIL Ea By-pass oil filters are
specialized for the removal of small, wear-causing dirt particles, thereby extending engine life. AMSOIL encourages
using an AMSOIL Ea By-pass filter system for maximum engine and oil life.
Oil Analyzers Inc. (715-395-0222) is a division of AMSOIL that provides cost-effective,
quality oil analysis services.
Health & Safety
This product is not expected to cause health concerns when used for the intended application and according to the
recommendations in the Material Safety Data Sheet (MSDS). An MSDS is available upon request at 715-392-7101 or
simply click here for a PDF version. Keep Out of Reach of Children. Don’t pollute. Return used
oil to collection centers.
|TYPICAL TECHNICAL PROPERTIES
10W-30/SAE 30 Diesel Oil (ACD)
|Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
|Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
|Viscosity Index (ASTM D-2270)
|Cold Crank Simulator Apparent Viscosity @ -25°C, cP (ASTM
|Pour Point °C (°F) (ASTM D-97)
|Flash Point °C (°F) (ASTM D-92)
|Fire Point °C (°F) (ASTM D-92)
|Noack Volatility, % weight loss (g/100g) (ASTM D-5800)
|High-Temperature/High-Shear Viscosity @ 150C, 1.4x10-6s-1, cP (ASTM D-5481
|Four Ball Wear Test (ASTM D-4172B @ 40 kg pressure, 75°C, 1200 rpm, 1 hr), Scar,
|Total Base Number